Your LAHOCO installation
Congratulations 🥳
You are the proud owner of a LAHOCO installation !
This page will help you with the first steps of commissioning.
1. Placement of the LAHOCO CORE
The first step is to place the LAHOCO CORE (yellow or white module) in its housing.
LCD placement
The LCD is designed to be placed on a piece of furniture, as centrally as possible within the home, so that it can cover the largest possible area with EnOcean and Wi-Fi radio waves.
LCP placement
The LCP is designed to be mounted on the 35mm DIN rail of the electrical panel.
If EnOcean components are to be used, it is strongly recommended that a remote antenna (item 800300) be placed outside the electrical panel to facilitate the passage of radio waves.
2. Power supply
LCD power supply
The LCD must be powered by the 24 VCD power supply provided with the device.
LCP power supply
It must be powered by an external 24 VCD power supply (not included). KYMO SA can supply a suitable power supply (item 671003).
3. Network
The network cable must be plugged in and provide an Internet connection of at least 10 Mbit/s.
Internet access is required for activation, updates, weather, and remote access to your LAHOCO. It is not required for other uses.
4. Activation
See the page dedicated to activation for the rest of the procedure.